POS Hardware profile - Worldpay UK
|
🛈 Important This topic applies only to Worldpay UK |
|
Field |
Description |
Required |
Auto set |
Sample value |
|
Host ip address |
Enter the IP address of machine where the Worldpay Total software (WPT) is installed. This is normally the loopback address as shown. |
Yes |
Yes |
127.0.0.1 |
|
Host port |
Enter the port number that the Worldpay Total software is configured to use. |
Yes |
Yes |
10000 |
|
Enable token for sale |
0: If it is set to 0, then It will not display card token list for sale transaction. 1: If it is set to 1, then It will display card token list for sale transaction. To enable token list one sales transaction using card must be places against the customer before. NOTE: Token list will be displayed only for Customer Present transaction.
|
No |
Yes |
0 |
|
Enable customer not present |
0: If it is set to 0, then It will automatically process the transaction in customer present mode. 1: If it is set to 1, then It will display prompt at POS to select transaction mode “Customer present or Customer not present”. Prompt will come after entering payment amount. Refer below screenshot for prompt.
|
No |
Yes |
0 |
|
Merchant code |
Omni channel scenarios: Enter the Merchant code as supplied by Worldpay UK. Omni channel scenarios not supported: This field is not required for simple cash and carry transactions. |
Yes |
No |
RetailComp |
|
Service API key |
This field is not used. Leave as the default value. |
No |
|
|
|
Service API url |
Omni channel scenarios: Enter the Service API url as supplied by Worldpay UK. Omni channel scenarios not supported: This field is not required for simple cash and carry transactions. Test: https://secure-test.worldpay.com/jsp/merchant/xml/paymentService.jsp Production: https://secure.worldpay.com/jsp/merchant/xml/paymentService.jsp |
Yes |
No |
|
|
User name |
Omni channel scenarios: Enter the user name as supplied by Worldpay UK. Omni channel scenarios not supported: This field is not required for simple cash and carry transactions. |
Yes |
No |
RetailCom |
|
Password |
Omni channel scenarios: Enter the password as supplied by Worldpay UK. Omni channel scenarios not supported: This field is not required for simple cash and carry transactions. |
Yes |
No |
com@123 |
|
Installation id |
Omni channel scenarios: Enter the Installation id as supplied by Worldpay UK. Omni channel scenarios not supported: This field is not required for simple cash and carry transactions. |
Yes |
No |
1234567890 |
|
Test mode |
Enter the WorldPay UK gateway environment to map to. The possible values are 0 for Live and 1 for Test. You should set this field to 0 for Live only for production devices and transactions. |
Yes |
Yes |
1 |
|
AVS check level |
This field is not used. Leave as the default value. |
No |
Yes |
1 |
|
AVS check |
This field is not used. Leave as the default value. |
No |
Yes |
1 |
|
Payment accept web url |
This field is not used. Leave as the default value. |
No |
Yes |
http://localhost:3973 |
|
|
|
|
|
|
